TNL29  全自动胀破强度测试仪( Automatic Fullty Bursting Tester )全自动胀破强度测试仪，可检测纸品，皮革，织物等材料的胀破强度，将油压施加在特定面积的橡胶膜上，再迫使织物胀破。This testercan determine the bursting strength of paper, leather, fabric and so on material, place hydraulic on rubber membrane of a particular area to impose the fabric to be bursted.技术参数Techniques：1.大屏幕触摸屏显示，压力自动校准  Large-screen touch screen display, automatic calibration of pressure.2.破裂灵敏度任意设置，保证不同材料的不同涨破情况   Rupture sensitivity can be set at random, to ensure different breaking up situation of a variety material.3.全自动测试模式，材料破裂后自动回位  Automatic test mode, material automatically return after breaking down.4.显示破裂值，残留值-膜片校正数（与国际上通用的测试方法一致）  Display the value of breaking, residual value-the number of patch-correcton.(with internationally agreed testing methods )5.气动夹紧装置，方便样品的夹持，同时显示夹持力，保证样品夹持的稳定性，完成测试全自动过程Pneumatic clamping device is convenient for sample to clamp, at the same time, display the clampling force to ensusre the stability of the sample clampling to complete the process of automatic test.6.加压速度可以调整，以适应不同材料标准的测试方法  Compression speed can be adjusted to adapt to test method of different material standard.7.可以根据客户需要配置微型打印机，随时打印测试数据  Can equip with micro-printer according to customer needs,  print the test data at any time.涨破橡胶膜采用美国MULLEN公司原装纺织用橡胶膜，保证测试数据与MULLEN公司原装机型一致。Breaking-up rubber membrane adopt rubber membrane used by American companies MULLEN original textile, to ensure that test data is consistent to MULLEN company original models.9.单位转换( Unit Converter )：KPA,PSI,KG,N10.环形夹具，内径为30．5±0．05mmRing clamp, internal diameter: 30.5±0.05mm 11.测量范围：8.00Mpa 最小分度值：0.002Mpa；Testing range: 8.00Mpa     minimum division value: 0.002Mpa12.最大扩张度Greatest expansion：70±0.02mm；13.电源Power supply: AC220V，200W，50-60Hz14.外形尺寸Dimension: 560×380×470mm(H×W×D)15.重量Weight: 55kg货号Model：TNL29A数字式顶破强度测试仪（触摸屏显示）TNL29ADigital RuptureTester ( Touching display)TNL29B数字式顶破强度测试仪（触摸屏，胀破高度显示）TNL29BDigital RuptureTester ( Touching, bursting height display )     TNL29C电脑控制（显示胀破曲线，胀破高度）TNL29C Computer control ( display bursting curve, bursting height)符合标准Standard：CNS2054 3479 JIS-L1004, L1018, L1031, K6328, P8131, P8112, ASTM-D2210, TAPPI T403ts-63  ASTM3786、ISO2758，ISO2960、JIS L1018/L1093，IWS TM170GB/T 7742.1-2005、FZ/T 60019