5822i 微型离子风机欢迎登陆www.virtual-sps.comThe Critical Environment In-tool Ionizing Blower Model 5822i is designed to meet small-footprint ionizer requirements in automated process tools, offering exceptional performance in hard disk drive manufacturing and backened semiconductor environments.The ionizer maintains a ±1 volt or better balance with an optional external sensor or ±3 volts or better balance without a sensor. An internal automatic balance correction system ensures your target is ionized accurately, presenting a significant time and cost savings. A collimator installed over the fan directs precisely balanced ionized air to the target without taking up valuable room in your environment. Internal circuitry suited for high humidity applications and 24 VDC input voltage makes the Model 5822i the standard choice for environments that need reliable, quality ESD protection in sensitive environments. Features & Benefits±1 volt or better balance (±3 volts or better without external sensor)Remotely placed control boxProvides the best corona-based ESD protection available for maximizing yieldsSeparate control box allows greater flexibility in mounting while maintaining excellent in-tool performanceUnique Hydro Wave1bearing fanFan is optimized to provide long service while minimizing any particle generationFacility Monitoring System (FMS) connection and audible alarmFaster response to ionization failure with notification through tool or facility monitoring system 1 Hydro Wave bearing fan developed by Panasonic (NMB-Mat branded DC axial fans)       Specifications           Input Voltage24 VDC at 400 mA from external power supply (100-240 VAC 50/60 Hz) or from tool powerChassisStainless steelIndicatorsOn Control Box: green power on LED, red alarm LEDIon EmissionSteady-state DCEmitter PointsTungsten alloy; eight per blowerAirflow20.5 cfm, typicalDischargeBetween 2-2.5 seconds at one foot, typical, taken in-line from the center of the fan (±1000V to 100V)1Balance±1 volt or better, typical, with external sensor; ±3 volts or better, typical, without sensorCleanroom ClassMeets ISO 14644-1 Class 4 (Fed Std. 209E Class 10)Audible NoiseLess than 56 dB, typical, measurements taken 12" (30.5cm) from fanMountingTwo mounting screw holes on bottom of blowerOperatingenvironmentTemperature: 50-95°F (10-35°C)Humidity: 30-65% RH (non-condensing)ISO Cleanroom Class 7 (Federal Class 10,000) or betterControlsBalance adjust, sensor gain adjust, fan "Slow, Off, Fast" switch, variable 'slow' fan speedDimensionsBlower: 4.5H x 3.3W x 2.4D inches (11.5H x 8.3W x 6.1D cm)Control Box: 1.0H x 5.2W x 2.4D inches (2.5H x 13.2W x 6.0D cm)WeightBlower: 1.14 lb (.51 kg)Control Box: .56 lb (.25kg)WarrantyTwo year limited warrantyCertificationsCE, TUV (both pending) 1. Tested in accordance with ANSI/ESD STM3.1-2000         Ordering Information         92-5822i-001Blower kit (includes blower, control box, external power supply and all interface cables)91-5822iBlower91-5822i-CTRLControl box14-21106External power supply33-1720-84-pin cable, fan unit to control box33-1740-16-pin cable, FMS out to Novx sensor25-20660US plug power cord, 8.2 ft. (2.5m)25-20710UK plug power cord, 8.2 ft. (2.5m)25-20735German Schuko plug power cord, 8.2 ft. (2.5m)25-20750China plug power cord, 8.2 ft. (2.5m)       Sensor FeedbackThe Model 5822i ionizer's optional sensor input operates with the Novx Series 7000 Monitor, Novx Series 3150/ 3350/3360 Controller or other industry-standard ionization controllers to detect and automatically correct the offset balance. With the sensor's antenna placed at the target area, feedback is sent to the Model 5822i blower's internal control system. This ensures that your target maintain a 1V or better balance at all times, no matter what environmental variables exist.       Directed AirflowThe patent-pending collimator fits over the fanstack of the blower and directs ionized air straight to the target. This means that the blower can be placed further away from the target with continued excellent discharge times and reach. This faster, directed airflow method improves ionization delivery and static elimination, significantly minimizing ion recombination.       Separate Control BoxThe Control Box was developed to accommodate tight tool size definitions. The Control Box connects to the optional Novx Series 7000 Monitor or Series 3150/ 3350/ 3360 Controller or other industry-standard sensor and common FMS (facility monitoring system) interfaces. This allows the blower to be installed into tight, hard-to-reach spaces without fitting additional connections or wiring into the area.