导航:全球石油化工网 >> 资讯频道 >> 技术装备

Broussard Completes Press Mooring Systems Installation on 547 A FPSO (USA)

[加入收藏][字号: ] [时间:2011-08-05 Offshore Energy Today 关注度:0]
摘要: Broussard, Louisiana-based mooring contractor Delmar Systems, Inc. has completed preset mooring...






    Broussard, Louisiana-based mooring contractor Delmar Systems, Inc. has completed preset mooring systems installation and facility connection operations of the Mississippi Canyon 547 “A” floating production facility as part of the WhoDat Field development for LLOG Deepwater Development Company, L.L.C.

    Delmar provided project engineering for anchor/mooring system design, fabrication oversight, installation engineering, operation procedures, and installation services for the facility’s installation. Delmar also assisted LLOG and the facility designer/builder EXMAR in certification verification authority (CVA) review and regulatory approval for the mooring system.

    In addition, Delmar procured, marshaled, and stored the twelve leg suction anchor, chain, polyester, chain mooring system at Delmar’s state-of-the-art 11-acre Fourchon dockside facility. The mooring legs were connected to the pre-installed suction anchors using Delmar’s patented subsea mooring connector. The Delmar subsea connector allows the mooring line to be easily connected to each preset suction anchor using a conventional anchor handling vessel (AHV) as opposed to larger, more expensive construction vessels that are normally used for permanent installations.

 


    Delmar preset all twelve suction anchor mooring systems using a single conventional AHV. Once the facility arrived on location, Delmar connected the facility to the preset mooring systems using two conventional AHVs and supported by a field ROV support vessel. Facility connection operations were efficiently completed in seven days.

    “Delmar was able to use existing contracted AHVs to drive maximum efficiency and cost savings for LLOG. We completed the project under budget and under the allocated time estimates. By making the best use of vessel tonnage and Delmar’s proven experience with AHVs, Delmar completed the project safely, without any accidents, injuries, or associated lost time,”
 said Brady Como, Delmar’s Executive Vice President.

    Delmar Systems, Inc. is a leading supplier of offshore mooring-related services including engineering design, mooring analysis, project management, planning, operational installation and mooring equipment services, providing the safest and most efficient mooring services available to the offshore industry since 1968.

关于我们 | 会员服务 | 电子样本 | 邮件营销 | 网站地图 | 诚聘英才 | 意见反馈
Copyright @ 2011 CIPPE.NET Inc All Rights Reserved 全球石油化工网 版权所有 京ICP证080561号